This week's episode of the Scale News Update gets into news from Losi, Roll Scale, Associated, Giveaway, and more!
Enter Here: https://gleam.io/uqze1/50k-sub-giveaway
Roll Scale Jeep: https://bit.ly/2ZrrvbS
Knight Customs: https://bit.ly/3gxEdeH
Associated DR10 Kit: https://bit.ly/32dzP0q
Horizon Suns out Funs out: https://bit.ly/3e7HXBW
Amain Specials: https://bit.ly/31T7w7E
New Wraith 1.9? https://bit.ly/2CCjp71
Harley's Thingiverse: https://bit.ly/2YKOhes
I'm on my way to 50k! To celebrate, I'm going to build a custom rig and give it to one of you! Thank you all for all the support over the years. I hope that this build is something that will be truly enjoyed.
Enter Here: https://gleam.io/uqze1/50k-sub-giveaway
Element Enduro Builders Kit: https://bit.ly/2YOM9m0
Team Garage Hack: https://www.facebook.com/teamgaragehack
Soots Scale Painting: https://bit.ly/2XxX0QH
Powerhobby 770 Winch: https://bit.ly/31UwG5A
This week's episode of the Scale News Update gets into news from Tamiya, Absima, RC4WD, Giveaway, and more!
Horrizon Suns out Funs out: https://bit.ly/3e7HXBW
Amain Specials: https://bit.ly/31T7w7E
Proline Pre-Cut F100 Heatwave: https://bit.ly/2ZIgH85
Powerhobby 770 Winch: https://bit.ly/31UwG5A
Powerhobby 14v Servo: https://bit.ly/2Z7RvJc
RC4WD Parts: https://bit.ly/2Z82LVX
RC4WD Falkens: https://bit.ly/3f9uOcU
RC4WD Dick Cepeks: https://bit.ly/31QsSCo
RC4WD Steel Wheels: https://bit.ly/3e7M5lF
Knight Customs: https://bit.ly/3gxEdeH
Tamiya Toyota: https://bit.ly/3e5Ucz5
Brass VP Portal Covers: https://bit.ly/2O2YJYE
Absima Sherpa: https://bit.ly/3iBLZGj
Harley's Thingiverse: https://bit.ly/2YKOhes
I'm on my way to 50k! To celebrate, I'm going to build a custom rig and give it to one of you! Thank you all for all the support over the years. I hope that this build is something that will be truly enjoyed.
Enter Here: https://gleam.io/uqze1/50k-sub-giveaway
Element Enduro Builders Kit: https://bit.ly/2YOM9m0
Team Garage Hack: https://www.facebook.com/teamgaragehack
Soots Scale Painting: https://bit.ly/2XxX0QH
This week's episode of the Scale News Update gets into news from Proline, Kyosho, SSD, Giveaway, and more!
Proline Stinger Wheelie Bar: https://bit.ly/2NHMd0w
Axial SCX10-III RTR Grey: https://bit.ly/3fqEIXs
Axial SCX10-III RTR Orange: https://bit.ly/30LK4sk
Traxxas ‘69 & ‘72 Blazer Bodies: https://bit.ly/2CxnbPg
HPI Battery Charger: I won't even link it...
SSD Trail King $319: https://bit.ly/2NIq2qU
Kyosho Trail King RTR (Yellow): https://bit.ly/2O0SJzm
Kyosho Trail King RTR (Blue): https://bit.ly/2VTnURs
Harley's Thingiverse: https://bit.ly/2YKOhes
This week's episode of the Scale News Update gets into news from Traxxas, Proline, Giveaway, and more!
Traxxas ‘69 & ‘72 Blazer Bodies: https://bit.ly/2CxnbPg
Traxxas 8 Hole Wheel and Tire Set: https://bit.ly/37URfA4
Traxxas Mag Wheel and Tires Set: https://bit.ly/2zZE6cm
Proline 5.5 Ibex: https://bit.ly/2YY9Irf
Vanquish Products 3 Gear Transmission
Clear: https://bit.ly/2Z2IwYa
Black: https://bit.ly/3doSBnB
CCHand Oxer VS4-10 Rear Bumper: https://bit.ly/2Yn4Xs2
Tamiya 1/14 Volvo FH16 Globetrotter 750 8x4 Tow Truck: https://bit.ly/3hUkXti
#ScaleNewsUpdate
Follow My Social Media!
Instagram.com/HarleyDesignsInc
Facebook.com/HarleyDesignsInc
My Camera/Production Gear: Sony A6400 Camera: https://amzn.to/2K0ixt1 Sigma 16mm F1.4 Lens: https://amzn.to/2Y9TQj2 Audio-Technica AT875R Microphone: https://amzn.to/2YcVqR7 GoPro Vlogging Rig: https://youtu.be/zjxKSan0AwQ Zhiyun Crane V2: http://amzn.to/2Eo3Zjc MacBook Pro 15in 512gb: http://amzn.to/2DGgBRQ Samsung T5 500gb Hard Drive: http://amzn.to/2CxRcN4 DJI Mavic Drone: http://amzn.to/2EGw2un
This week's episode of the Scale News Update gets into news from RC Nerds, Holmes Hobbies, Giveaway, and more!
Holmes Hobbies Revolver V2: https://bit.ly/3fuwkq0
Castle Sidewinder 4: https://bit.ly/37EUGKT
Holmes Hobbies Puller Pro: https://bit.ly/3fsym9V
Axial SCX10-III RTR Grey: https://bit.ly/3fqEIXs
Axial SCX10-III RTR Orange: https://bit.ly/30LK4sk
Tekin Eliminator Motors: https://bit.ly/3ftup4Q
Team KNK Scale Hardware: https://bit.ly/2zyzzx8
Cross RC 1:7 Scale Driver: https://bit.ly/2UNDOwk
RC Nerds 1966 Bronco Parts: https://bit.ly/2N4fbHv
RC4WD 2015 D90: https://bit.ly/3d2Ejc5
Over the last few years, brushless systems have become the only thing I have been installing in my scale trucks. The power and reliability has always been my attraction to them but the advancement of the ESC programming to make these systems nearly as smooth as brushed setups has pushed everything over the top.
Below are my preferred motor and ESC combinations that I have been using in all of my 1.9 Scale trucks (SCX10-II, SCX10-III, VS4-10 Pro, VS4-10 Ultra, Wraith 1.9, Element Enduro, Traxxas TRX4, etc). I run these systems on 3s and 4s Lipo (although it should be noted that 4s is not recommended on a Tekin 3100kv ROC412). Most of my suggestions will guide you between the 2700-3100kv range for the motors, I feel like this is a sweet spot for me. These motors will have good low speed control but will still be able to spin up the tires to blast down the trail when you see that opportunity to open it up!
Motor Options:
Option 1 - Holmes Puller Pro 540 2700KV: HH - https://bit.ly/3cayMAj Amain - https://bit.ly/3eEkSaD
Option 2 - Tekin ROC412 3100KV: https://bit.ly/2zFWmrb
ESC Options:
Option 1 - Castle Mamba X: https://bit.ly/2yRwnMU
Option 2 - Tekin RX4: https://bit.ly/2zL4LcJ
Other Options:
Hobbywing Axe 540: https://bit.ly/3foZ5nS
The Axe system is not a system I personally prefer to run. I feel like the startup is too weak, the overall torque is much less than the competing systems, and I do not like the self modulating power that this system incorporates. However that doesn’t make this a low quality system, it’s just not one that I like the feel of driving. You may still enjoy it.
Castle Slate System: https://bit.ly/3e5RAC8
The Slate motors in combination with the Mamba X is a good choice but again I feel that these 1406 motors are a little soft on torque. The start up is fairly smooth but that is part of the reason for the softer torque as well. The Mamba X ESC is one of the best and really packs in some great features. These are also one of the best priced combos available.
It felt good to hit the rocks on a cold day in June! Great to get the hardbody Toyota out into nature finally.
Portal Rear Install: https://youtu.be/RZS3i59okq4
VS4-10 Pro
Tekin RX4: https://bit.ly/2zL4LcJ
Tekin ROC412 3100KV: https://bit.ly/2zFWmrb
Tekin T360 Servo: https://bit.ly/36JGL5X
Tekin T180 Servo: https://bit.ly/2ARuPTR
Vanquish Machete V2: https://bit.ly/2Mf71eW
Vanquish Dredger Beadlocks: https://bit.ly/2Mf71eW
Proline 4.75 1.9 Krawlers (G8): https://bit.ly/2XOig4A
VFD Hurtz Dig: https://bit.ly/3csHauB
Futaba 4PM: https://bit.ly/2TY8B9o
Soots Scale Painting: https://bit.ly/2XxX0QH
VS4-10 Class 1
Vanquish VS4-10 Chassis Kit: https://bit.ly/3fa9vYt
Vanquish VFD Transmission Kit: https://bit.ly/2Yg29Ma
Vanquish D44 Front Axle Housing (clear): https://bit.ly/3dQLTHU
Vanquish D44 Rear Axle Housing (clear): https://bit.ly/37gMPD7
21% Overdrive VFD Gear Set: https://bit.ly/2MohRzr
Castle Micro X: https://bit.ly/3dSvm6k
Holmes Puller Pro 540 2700KV: https://bit.ly/3eEkSaD
PST-200 Servo Winch: https://bit.ly/3cGNz5L
This week's episode of the Scale News Update gets into news from Vanquish, Proline, Carry-All-RC, and more!
Carry-All RC Page: https://bit.ly/2Y84ydv
Vanquish Machined Rod Ends:
Clear - https://bit.ly/2YjLw2l
Black - https://bit.ly/2AgpUMa
Amain - https://bit.ly/3cF2BZC Available soon
Tekin Store: https://bit.ly/2XJG1KW
Tekin Brushed Motors Amain: https://bit.ly/2YadZra
Traxxas Slash Kit: https://bit.ly/30zvCnh
JConcepts Colt Beadlocks: https://bit.ly/3h8eP0f
JConcepts Beadlocks Amain: https://bit.ly/2UmMbPm
Mon-Tech Mont-Rock 1/10 Crawler Body: https://bit.ly/3h7i3kA
BowHouse Element Battery Tray: https://bit.ly/2UqfqAz
In this series, we start with a modest truck purchase and do our best to Flip That Truck to meet our ultimate standards at the end! The second truck of season 2 is unlike any truck I've had on the bench in quite awhile!
This week's episode of the Scale News Update gets into news from Element, Proline, Vanquish Products, and more!
Element 3D Engine: https://bit.ly/2U0Uosl
Associated CR28 RTR Trail Truck - https://bit.ly/3dnQiCc
Proline & Blake Wilkey: https://youtu.be/00mR9J0kO0E
RC4WD Agilis C-Metric 1.9: RC4WD Site - https://bit.ly/2AvDLhv RC4WD Tires @ Amain - https://bit.ly/301MUca
Incision 80mm Scale Shocks: VP Site - https://bit.ly/3eHz5Uy Amain - https://bit.ly/2XmuH7A
Incision 80mm Spring Set: VP Site - https://bit.ly/3eESJQN Amain - https://bit.ly/2XmuH7A
CCHand VS4-10 Parts: https://bit.ly/3gN2huS
HeyOK Light Controller: HO @ RCC - https://bit.ly/3eBqfY8 HeyOK @ Amain - https://bit.ly/3dplUYb
Transforming the Axial RR10 Bomber into the ultimate version of itself is going to be an in-depth conversion which will get into every single aspect of the vehicle. Episode five finishes upgrading the axles with some of the strongest parts available.
High Altitude Performance Facebook: https://bit.ly/2ScURXh
High Altitude Performance IG: https://bit.ly/2KCNhRE
Vanquish Products Stage 1 Kit:
VP Site - https://bit.ly/2M9eagA
Amain - https://bit.ly/2BfOCMJ
Vanquish Products VXD Rear Axle Shafts
VP Site - https://bit.ly/2WGF7gT
Amain - https://bit.ly/2ZT1geM
Incision Machined Gear Set
VP Site - https://bit.ly/3atWUMY
Amain - https://bit.ly/3eAAA6N
Vanquish servo horn:
VP Site - https://bit.ly/2XF0ijw
Amain - https://bit.ly/2MfQtUg
Tekin T360 Servo: https://bit.ly/36JGL5X
This week's episode of the Scale News Update gets into news from JConcepts, Tamiya, Vanquish Products, Proline and more!
Vanquish Machete V2 1.9's:
VP Site - https://bit.ly/2yy5Eot
Amain - https://bit.ly/2Mf71eW
Vanquish Dredger Beadlocks:
VP Site - https://bit.ly/3c9fmvm
Amain - https://bit.ly/2Mf71eW
Proline Rock Van: https://bit.ly/2yMCnGz
Proline Tough Bodies: https://bit.ly/2BjmDvJ
Axial UMG 6x6 Interior:
Tower - https://bit.ly/2yCTz1m
Amain - https://bit.ly/3cn4auR
JConcepts Grand National: https://bit.ly/2zHsWJa
Concepts Junior Mortician:
JC Site - https://bit.ly/3c3Db7q
Amain - https://bit.ly/2Amj4V2
The Axial SCX10 Line-up has always been the most versatile scale platform at our disposal. This Long Wheelbase UMG10 is just one combination of the Raw Builders Kit and some of the many available parts that can be put together with just a small amount of work. The end result should be a unique driving experience!
Axial Raw Builders Kit: https://bit.ly/36RNNp9
6x6 Conversion Kit: https://bit.ly/2BiIu6x
Proline Grunt Tires: https://bit.ly/2AmNRkz
Axial Driveshaft Parts: https://bit.ly/36LK10s
UMG 6x6 Body: https://bit.ly/3dkbI2T
UMG 4x4 Bed: https://bit.ly/3deyOIh
UMG 4x4 Bed Sides: https://bit.ly/304rdbJ
Incision Panzer Wheels:
VP Site -
Amain - https://bit.ly/3chOfy9
This week's episode of the Scale News Update gets into news from Element RC, Vanquish Products, Proline and more!
Scale Nationals FB Event Group: http://bit.ly/32Gt6J0
RC4WD Facebook Page: https://bit.ly/2WIAZxV
Proline Rock Van:
PL Site - https://bit.ly/2X3NL9e
Amain - https://bit.ly/2yMCnGz
Element RC Trail Runner: https://bit.ly/3eEh8G7
Vanquish Brass SLW Hubs:
VP Site - https://bit.ly/2Tdx4XR
Amain - Amain - https://bit.ly/2Mf71eW
Flying Cars: https://apple.co/3bDbBhm
This week's episode of the Scale News Update gets into news from Axial, Proline, Cross RC and more!
MST J45C CFX-W: https://bit.ly/2YPTRN0
Proline Items: http://bit.ly/2IggiAV
Cross UT4: https://bit.ly/2xSWMcz
3D Modeling Live Stream: https://youtu.be/18uP7soPkkg
Transforming the Axial RR10 Bomber into the ultimate version of itself is going to be an in-depth conversion which will get into every single aspect of the vehicle. Episode four gets wild by replacing the heart of the Bomber!
High Altitude Performance Facebook: https://bit.ly/2ScURXh
High Altitude Performance IG: https://bit.ly/2KCNhRE
56t Spur Gear:
VP Site - https://bit.ly/2zaONYS
Amain - https://bit.ly/3dkCiZV
Idler Gear Pin/Shaft:
VP Site - http://bit.ly/2MbTYxM
Amain - https://bit.ly/36JKwIB
Incision Slipper Eliminator/Top Shaft:
VP Site - http://bit.ly/2Mb9aeg
Amain - https://bit.ly/36Lubmt
Incision Transmission Gear Set:
VP Site - http://bit.ly/30OscL4
Amain - https://bit.ly/2XhPjxL
Incision Wraith Outputs:
VP Site - https://bit.ly/3ccbjPI
Amain - https://bit.ly/3eym0MZ
Wraith Transmission Bearing Kit:
VP Site - https://bit.ly/2WvXmVV
Amain - https://bit.ly/3dlcTPD
Yeti Rear Upper Links (used up front):
VP Site - https://bit.ly/3b92Knk
Amain - https://bit.ly/3gNPSam
Jato Rod Ends:
VP Site - https://bit.ly/3dp2wtV
Amain -https://bit.ly/2XgR5yX
This week's episode of the Scale News Update gets into news from Cross RC, Kyosho, Knight Customs, Loops RC and more!
Turks and Jerps IG: https://bit.ly/2SyQuWz
Kyosho Trail King RTR (Yellow): https://bit.ly/3b3BK8N
Amain - https://bit.ly/3eDBFLh
Reefs RC 777 Servo: https://bit.ly/3djiFRV
Loops RC FJ45 Body: https://bit.ly/3di7eJG
Vanquish Products VXD Rear Axle Shafts:
VP Site: https://bit.ly/2WGF7gT
Amain: https://bit.ly/2ZT1geM
Incision Shock Pivot Balls:
VP Site - https://bit.ly/2KX3DEW
Amain - https://bit.ly/3etTFYe
Knight Customs Parts Shapeways: https://bit.ly/3dfJQww
Knight Customs MyMiniFactory: https://bit.ly/3cRfgcn
This week's episode of the Scale News Update gets into news from Tamiya, Knight Customs, SBG and giveaway updates!
Jconcepts C10: https://bit.ly/2SbSofC
Knight Customs SR5: https://bit.ly/3aJSH8b
Knight Customs Jeep Fenders: https://bit.ly/3aJTSEu
Knight Customs Winch Mounts: https://bit.ly/3cRfgcn
Carry-All RC Backpack: https://bit.ly/2Y84ydv