Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
These downloadable STL files allow you to mount the magnets from the Pro-Line Racing Rock-Tek Wheel Weight System to the Vanquish H10 plastic or aluminum knuckles.
This setup is designed for use with 1.9 wheels using a 475 hub. Non-Vanquish wheels, hub offsets, and wheel configurations may fit, but they are not guaranteed.
This is a digital download only. No physical parts are included.
Designed for the Vanquish H10 platform
Fits Vanquish H10 plastic knuckles
Fits Vanquish H10 aluminum knuckles
Mounts the magnets from the Pro-Line Racing Rock-Tek Wheel Weight System
Designed around 1.9 wheels using a 475 hub
Allows use of the Rock-Tek magnetic weight system without permanent knuckle modification
STL files included for 3D printing
These files were designed specifically around the following setup:
Vanquish H10 plastic or aluminum knuckles
Pro-Line Racing Rock-Tek Wheel Weight System magnets
1.9 wheels with a 475 hub
Other wheel brands, wheel offsets, hub sizes, or wheel designs are not guaranteed to fit. Internal wheel clearance can vary significantly between manufacturers, so test fitting is recommended before final installation.
STL files for the H10 Rock-Tek magnet mounts
Pro-Line Racing Rock-Tek Wheel Weight System
Vanquish H10 plastic or aluminum knuckles
1.9 wheels with 475 hubs
3D printer
Filament suitable for RC use
Print settings, material choice, and orientation are the responsibility of the user.
PETG, ASA, ABS, nylon, or other durable materials are recommended. PLA may work for light use, but it is not recommended for parts exposed to heat, impact, or long-term outdoor use.
This product is a digital STL file download only. No printed parts, magnets, wheel weights, knuckles, wheels, hubs, or hardware are included.
These files are intended for personal use and installation on compatible Vanquish H10 builds. Fitment with other setups is not guaranteed.
This product includes digital STL files only
No physical parts are included
All designs © Harley Designs Inc.
These downloadable STL files allow you to mount the magnets from the Pro-Line Racing Rock-Tek Wheel Weight System to the Vanquish H10 plastic or aluminum knuckles.
This setup is designed for use with 1.9 wheels using a 475 hub. Non-Vanquish wheels, hub offsets, and wheel configurations may fit, but they are not guaranteed.
This is a digital download only. No physical parts are included.
Designed for the Vanquish H10 platform
Fits Vanquish H10 plastic knuckles
Fits Vanquish H10 aluminum knuckles
Mounts the magnets from the Pro-Line Racing Rock-Tek Wheel Weight System
Designed around 1.9 wheels using a 475 hub
Allows use of the Rock-Tek magnetic weight system without permanent knuckle modification
STL files included for 3D printing
These files were designed specifically around the following setup:
Vanquish H10 plastic or aluminum knuckles
Pro-Line Racing Rock-Tek Wheel Weight System magnets
1.9 wheels with a 475 hub
Other wheel brands, wheel offsets, hub sizes, or wheel designs are not guaranteed to fit. Internal wheel clearance can vary significantly between manufacturers, so test fitting is recommended before final installation.
STL files for the H10 Rock-Tek magnet mounts
Pro-Line Racing Rock-Tek Wheel Weight System
Vanquish H10 plastic or aluminum knuckles
1.9 wheels with 475 hubs
3D printer
Filament suitable for RC use
Print settings, material choice, and orientation are the responsibility of the user.
PETG, ASA, ABS, nylon, or other durable materials are recommended. PLA may work for light use, but it is not recommended for parts exposed to heat, impact, or long-term outdoor use.
This product is a digital STL file download only. No printed parts, magnets, wheel weights, knuckles, wheels, hubs, or hardware are included.
These files are intended for personal use and installation on compatible Vanquish H10 builds. Fitment with other setups is not guaranteed.
This product includes digital STL files only
No physical parts are included
All designs © Harley Designs Inc.