Customize your FlySky G11P transmitter with the face of a Vanquish Products 1.9" wheel while adding a thumb extension for easier one-handed driving.
This 3D printable adapter is designed to mount the face of a Vanquish Products 1.9" x 0.8" wide wheel to the FlySky G11P steering wheel assembly. The design uses only the machined wheel face and, when applicable, the beadlock ring—you do not need to install the complete RC wheel.
An integrated thumb extension provides an additional steering point on the wheel, making it easier to steer the transmitter with one hand.
The example shown in the product photos uses a Vanquish Products TE37, while the product rendering shows the adapter with a Vanquish Products Method 310.
Designed for:
FlySky G11P transmitter
Vanquish Products 1.9" wheels that are 0.8" wide
Uses the wheel face only
Beadlock ring can be installed on wheel designs that use one
Integrated thumb extension for easier one-handed steering
The complete RC wheel is not installed on the transmitter. This adapter is specifically designed to utilize the wheel face and, where applicable, its beadlock ring.
Compatibility with other wheel widths, brands, or wheel designs has not been verified.
This is a digital download for 3D printing. No physical parts, transmitter, Vanquish Products wheel, hardware, or other accessories are included.
The download includes the files needed to print the G11P wheel adapter with integrated thumb extension.
Print settings may vary depending on your printer, material, and desired finish. A reasonably strong material with good layer adhesion is recommended, particularly because the thumb extension will see additional force during use.
As with any 3D printed component, final strength and fit can vary based on material choice, printer calibration, print orientation, and slicer settings.
This product is an independently designed accessory and is not manufactured, sponsored, endorsed, or affiliated with FlySky or Vanquish Products.
FlySky, G11P, Vanquish Products, TE37, Method 310, and other product or brand names referenced in this listing are used solely to identify compatibility. All trademarks and product names remain the property of their respective owners.
Due to variations in 3D printers, materials, slicer settings, and individual installations, minor fitting or finishing may be required.
These files are provided for personal, non-commercial use only.
You may print the included files for your own personal use. You may not sell, redistribute, share, sublicense, upload, or otherwise distribute the digital files, modified versions of the files, or physical prints produced from these files for commercial purposes without prior written permission.
Purchase of this download does not transfer ownership of the underlying design or intellectual property.
Digital product — no physical item will be shipped.
Customize your FlySky G11P transmitter with the face of a Vanquish Products 1.9" wheel while adding a thumb extension for easier one-handed driving.
This 3D printable adapter is designed to mount the face of a Vanquish Products 1.9" x 0.8" wide wheel to the FlySky G11P steering wheel assembly. The design uses only the machined wheel face and, when applicable, the beadlock ring—you do not need to install the complete RC wheel.
An integrated thumb extension provides an additional steering point on the wheel, making it easier to steer the transmitter with one hand.
The example shown in the product photos uses a Vanquish Products TE37, while the product rendering shows the adapter with a Vanquish Products Method 310.
Designed for:
FlySky G11P transmitter
Vanquish Products 1.9" wheels that are 0.8" wide
Uses the wheel face only
Beadlock ring can be installed on wheel designs that use one
Integrated thumb extension for easier one-handed steering
The complete RC wheel is not installed on the transmitter. This adapter is specifically designed to utilize the wheel face and, where applicable, its beadlock ring.
Compatibility with other wheel widths, brands, or wheel designs has not been verified.
This is a digital download for 3D printing. No physical parts, transmitter, Vanquish Products wheel, hardware, or other accessories are included.
The download includes the files needed to print the G11P wheel adapter with integrated thumb extension.
Print settings may vary depending on your printer, material, and desired finish. A reasonably strong material with good layer adhesion is recommended, particularly because the thumb extension will see additional force during use.
As with any 3D printed component, final strength and fit can vary based on material choice, printer calibration, print orientation, and slicer settings.
This product is an independently designed accessory and is not manufactured, sponsored, endorsed, or affiliated with FlySky or Vanquish Products.
FlySky, G11P, Vanquish Products, TE37, Method 310, and other product or brand names referenced in this listing are used solely to identify compatibility. All trademarks and product names remain the property of their respective owners.
Due to variations in 3D printers, materials, slicer settings, and individual installations, minor fitting or finishing may be required.
These files are provided for personal, non-commercial use only.
You may print the included files for your own personal use. You may not sell, redistribute, share, sublicense, upload, or otherwise distribute the digital files, modified versions of the files, or physical prints produced from these files for commercial purposes without prior written permission.
Purchase of this download does not transfer ownership of the underlying design or intellectual property.
Digital product — no physical item will be shipped.
